|
|
Stepper Motor & Drivers |
Stepper Motor
Integrated micro
stepping drive and high torque stepper motor
Torque sizes from 22 to 749 N-cm (32 to 1061 oz-in)
3 frame sizes available - NEMA 17,
23 and 34
Available in 3 stack lengths
Choice of connectors including flying
leads, spring clips and pluggable connector
+12 to 48 VDC or +24 to +75 VDC
Input Voltage
Optional 500 or 1000 line encoder
for position verification
Optional hand control knob for manual
positioning of the motor
Programmable resolution settings
from 400 to 51200 steps per revolution
Optional programming cable available
Stepper Driver
Motor supply voltage:
AC 32 - 60V (40 - 80Vdc)
Choice of 15 peak phase current levels
from 0.5A to 8A through dip-switch
Choice of 7 resolutions from full step
to 64 microsteps through dip-switch
Perfect current regulation especially
around zero crossing
Opto-isolated inputs for Direction, Clock
and enable
Short-circuit and over temperature protections
A complete solution for the motion control
needs
Standalone Operation with built-in clock
generation
Automatic current reduction by 50% in
stand by mode
mainly for bipolar stepper motors. Our drives has the following unique
features: single supply, optically isolated inputs, high chopping
frequency, wide operating frequency range
etc. Apart from this , the basic AM drives can be customised
for OEM applications, providing
|
|
|
|